Explanation of Auto Lock function for U-Bolt WiFi / U-Bolt Z-Wave / U-Bolt Pro WiFi / U-Bolt Pro Z-Wave ;
The feature of the Auto Lock means that the smart lock will automatically return to the locked status within a set time after the door is closed.
If your smart lock fails to lock automatically after the door is closed. There may be the following reasons:
1. Please make sure that the Auto Lock feature has been turned on in the App settings;
2. Please ensure that the door is fully closed. A false status on the door sensor will prevent the Auto Lock feature from engaging;
3. Please make sure the door sensor has been installed with the interior assembly;
If you install the door sensor on the outdoor side, the door status may not be accurate.
4. Please check if the Door Sensor is installed correctly;
a) If you have installed the Door Sensor in a metal door that interferes with the magnet inside the Door Sensor, the Auto-Lock will work exceptionally(In this case, the Door Sensor sticks to the metal door magnetically);
b) If you have not followed the Installation Guide of the Door Sensor, the Auto-Lock feature will not work either. So please disconnect the sensor and pair it again. Make sure that you follow the instructions carefully.
Related FAQs: How to Set Up Auto Lock for Ultraloq U-Bolt Series?