Ultraloq Lever is designed for single-hole doors, doors without a deadbolt. Please check this article to confirm the standard single-hole door has been ready.
Please watch our easy step-by-step installation video before attempting to install your Ultraloq Lever lock.
Installation Tips for Ultraloq Lever:
1. The latch's angle faces the jamb.
2. The latch's spindle hole can't be titled.
3. Route the cable through the hole above the latch.
4. The spindle is connected to the exterior assembly of the Ultraloq Lever. Please don't pull out the spindle.
5. Both handles of the Ultraloq Lever can be rotated freely for the right unlock or left unlocked.